Las últimas tecnologías de Flexipanel | Heisener Electronics
Contáctenos
SalesDept@heisener.com +86-755-83210559-836
Language Translation

* Please refer to the English Version as our Official Version.

Las últimas tecnologías de Flexipanel

Registros 11
Página  1/1
Technology Cover

2023-02-28, The Flex Power module's 2w DC/DC converter is ideal for isolating high side door drive power applications

The Flex Power module's PUC-BG series of DC/DC converters are packaged with the industry standard SIP7, fully packaged and installed through holes, and provide 2 W of output power. The product is rated for ambient derating from -40°C to +100°C, with full power up to +85°C in convective cooling environments. This performance is achieved by efficient designs that typically reach 80%. These components require no minimum load and provide continuous short-circuit protection.

Technology Cover

2022-11-17, Flex Power Modules Introduces 8:1 Non Isolated Bus Converter

Flex Power Modules is now available with BMR320, a non-isolated, non-regulated DC-DC intermediate bus converter with a fixed 8:1 input/output voltage ratio and compact appearance. Operating in the 40-60 VDC input voltage range, the product produces an output voltage of 5 to 7.5 VDC, ideal for powering point-of-load converters at lower intermediate bus voltages to optimize system efficiency.

Technology Cover

2022-11-16, Flex Power Modules High Efficiency Power Interface Modules (PIMs) - PIM4610/PIM4710

Flex Power Modules' PIM4610 and PIM4710 pci simplify blade server design based on advanced tca standards and other applications. PIM4x10 modules are rated for power up to 1080 W with an efficiency level of up to 98.8%. They have input ranges from 36 V(DC) to 75 V(DC). The module is an industry standard quarter brick sized package featuring unique PIM nails.

Technology Cover

2022-07-05, CEVA and FLEX LOGIX announce successful launch of first DSP chip with embedded FPGA to support flexible/changeable instruction set architecture

Flex Logix, Inc., a leading provider of reconfigurable computing solutions, architecture and software, and CEVA, Inc., a leading global licensor of wireless connectivity and smart sensing technologies and integrated IP solutions, announce the successful launch of the world's first Flex Logix EFLX embedded FPGA (eFPGA) chip product with integrated CEVA-X2 DSP instruction extension interface. Called SOC2, the ASIC device supports a flexible and changeable instruction set to meet demanding and changing processing workloads.

Technology Cover

2022-06-21, Easy to configure and efficient digital 40A PoL

The Flex Power Module offers its BMR473 digital PoL converter packaged in a space-saving SIP or horizontal mount format. A PMBus interface is provided, allowing monitoring and configuration, including input overvoltage and undervoltage protection thresholds and output overcurrent limits. The SIP version of the device is only 26.3mm × 8.8mm × 15.6mm, and the board area occupied is less than 2.3cm.

Technology Cover

2022-05-24, Digital 1/4 brick DC-DC increases rated power to 1700W peak

Flex Power Modules has released an enhanced version of the BMR350 non-isolated quarter brick DC-DC bus converter, the BMR350 X250/531. The product remains the same size 58.4mm x 36.8mm, height only 12mm, input range 40-60VDC (80V/ 100ms) the same. Like the original device, the product is excellent as an intermediate bus converter for powering processors and ASics with peak power requirements.

Technology Cover

2022-05-01, New variants have been added to the Quarter brick DC-DC range

The Flex power module has expanded its BMR491 range of digital, quarter-brick DC-DC converters with two new variants. The new model offers the company's "hybrid regulation ratio (HRR)" technology, where the output voltage varies proportionally to the input voltage but not with the load current, optimizing efficiency and EMI filtering. The BMR4912307/856 has a smaller 13.4mm height for space-constrained applications and all modules operate at temperatures ranging from -40 ° C to +125 ° C,

Technology Cover

2022-04-16, DC-DC converter family adds new variants

Flex Power Modules extend the range of their 2 "x 1" package, through-hole DC-DC converters with three new components, single-output 24V (21.6-26.4V), 48V (43.2-52.8V) and 54V (48.6-59.4V). The package of these power-intensive converters provides mechanical protection and reliable operation in high shock and vibration levels or high dust/humidity environments. The product size is 2 "× 1" (25.4mm × 50.8mm) and the height is 0.47 "(11.9mm).

Technology Cover

2022-04-11, A two-phase voltage stabilizer designed for ai applications

Flex Power Modules provide its first two-phase regulated voltage module, the BMR510, with a total continuous output current of 80A and a total peak output of 0.5-1.3V from 4.5-16V inputs for 140A. Less than 0.7cm3 (10mm x 9mm x 7.6mm), the module provides a complete power supply phase, combined with magnetic, highly specified regulator modules for space-limited applications.

Technology Cover

2022-02-08, Second Generation Data Center Direct Conversion DC-DC Converters

The Flex power module provides the BMR482, its second generation direct conversion isolated DC-DC converter. The device achieves a maximum efficiency of 91.3% at 0.8V output at 53Vin, 2-3% higher than the IBC - and POL-based equivalent scheme. The size is only 30mm x 12.7mm x 16.8mm, and up to 5 'satellite' modules can be added if higher output current is required. The device is compatible with PMBus V1.3, AVSBus and Intel SVID interfaces, providing complete digital control. Make power system design simpler and faster

Technology Cover

2021-11-14, The next generation non-isolated digital quarter brick DC-DC provides high efficiency

Flex Power Modules Introduced the BMR350, a quarter brick non-isolated DC-DC converter. The rated continuous power and peak power are 860W and 1200W respectively. And the footprint is very small. Keep costs and component pressures low without compromising efficiency