TDK launched the B3271 * H * series of new EPCOS film capacitors. The new series of components are suitable for DC support applications with high energy and power density. The rated voltage range is 500 V DC to 1600 V DC, the capacitance range is 0.47 µ F to 170 µ F, and the maximum operating temperature is 105 ° C
TDK FS14 micro load point (µ POL) DC DC power supply module consists of matched MOSFET, driver and inductor, and a single semiconductor encapsulated by embedded substrate (SESUB). On chip pulse width modulation (PWM) controller, integrated MOSFET and built-in inductor and capacitor form an extremely compact and accurate voltage regulator
TDK Corporation has introduced the 30-75W TDK-Lambda brand PYQ series of DC-DC converters. The PYQ50 with 30-50W output power provides a 12:1 ultra-wide input range of 14VDC to 160VDC, and the PYQ75 with 75W has an 8:1 input of 9-75VDC.
TDK has introduced the new B58101A0109A (HP100) series heat pump sensors. This NTC (Negative temperature coefficient) sensor is designed to meet the requirements of automotive applications. It can measure the refrigerant temperature in the pipeline indirectly by measuring the temperature of the pipeline surface
TDK Corporation (EPCOS) has added the B32354S series to its portfolio of metallized polypropylene (MKP) capacitors for filter applications. Typical uses for durable film capacitors include filter applications with stringent requirements, such as inverter output filtering for drivers, uninterruptible power supplies (UPS), and photovoltaic inverters
TDK-lambda's CN-B110 series 200 W to 300 W DC/DC converters are capable of operating from a wide input voltage range of 43 VDC and are compatible with 72 VDC or 110 VDC nominal rail systems. Applications include rolling stock, railway track equipment, robotics, AGV and scientific research equipment.
TDK has introduced the new B58101A0109A* (HP100) series heat pump sensors. This NTC (Negative temperature coefficient) sensor is designed to meet the requirements of automotive applications. It can measure the refrigerant temperature in the pipeline indirectly by measuring the temperature of the pipeline surface. The new element is suitable for harsh working conditions
TDK Corporation has expanded its TMR angle sensor portfolio with the release of the TAS4240 TMR-based angle-sensor for automotive and industrial applications. The device is supplied in a compact TSSOP8 package and offers two redundant analog single-ended SIN/COS outputs. The sensor provides precise angle measurements in applications where high performance is required and space is limited.
TDK-Lambda’s 40 W and 60 W rated PXD series of 2” x 1” DC/DC converters are capable of operating from a wide input voltage of 9 VDC to 36 VDC or 18 VDC to 75 VDC. These converters have a copper case providing six-sided shielding for reduced EMI, simplifying system compliance. Industrial control, telecom/datacom, test, measurement, and battery-operated equipment are some of the many applications for the PXD.
TDK MLJ-G series fixed inductors are compact components developed for automotive power over coaxial (PoC) implementation. The inductor provides a maximum impedance rating of 2500 ohms and provides less current variation than conventional multilayer inductors. Despite the size of 1.6mm x 0.8mm x 0.8mm, these inductors achieve a high current rating of 500mA, greatly reducing impedance variation during current application.
TDK has introduced the new B32354S* series of AC filter capacitors, adding to its EPCOS metallized polypropylene film (MKP) capacitor portfolio for AC filter applications. Capacitors are 4-pin design with 52.5 mm pin spacing, rated for 275 VAC or 350 VAC, capacitors range from 10 μF to 40 μF, and maximum operating temperature 85 °C.
EPCOS/TDK's CeraCharge is the first solid-state rechargeable battery with compact SMD technology. Depending on the requirements, the battery can be charged and discharged from a few dozen cycles to 1,000 cycles. With its compact EIA 1812 package (4.5 mm x 3.2 mm 1.1 mm) it offers a capacitor of 100 μah with a voltage rating of 1.4V. In addition to the 100μcurrent rating, the battery is also able to provide current to several horses in short order
TDK's MLJ-G series of multilayer inductors are targeted for automotive power over coaxial (PoC) implementations. MLJ1608WG series inductors achieve a maximum impedance of 2500 Ω. They also retain an impedance level of 1000 Ω in the frequency range from 300 MHz to 2 GHz. Although these components measure 1.6 mm (L) x 0.8 mm (W) x 0.8 mm (H), they still support a high current rating of 500 mA.
TDK Corporation (TSE:6762) announces the launch of the MLJ1608WG series of new multilayer inductors. This compact component is designed for use in automotive Power over Coax (PoC), the new inductor family provides high impedance over a wide frequency range Impedance changes during current application compared to competitor inductors Significantly lower for more efficient power transfer Compact form factor saves valuable space
TDK Corporation has introduced the EPCOS E13EMHV series of compact SMT transformers with high dielectric strength for various DC/DC converter topologies. Isolation distances comply with IEC 60664-1 and 61558-2-16 standards, enabling high operating voltages of 1,000 VDC. Withstands transient overvoltages up to 2,500 VPEAK. High dielectric strength of 3,000 VAC (50 Hz, 60 seconds) between primary and secondary sides.
TDK has introduced a new compact EPCOS E13EMHV series SMT transformer with high dielectric strength. Resistance voltage between primary/secondary side up to 3000 V AC (50 Hz, 60 seconds, operating voltage up to 1000 V DC, compact size: 12.9 x 15.8 x 11.4 mm, space distance and creepage distance in accordance with IEC 60664-1 standards and comply with the AEC-Q200 Rev.D standard