OmniVision is the industry's first and only three-layer stacked BSI global shutter (GS) image sensor OG0TB. This ultra-small size image sensor is used for eye and face tracking in AR/VR/MR and Metaverse consumer devices in a package size of only 1.64mm x 1.64mm with a 2.2 micron pixel size and a 1/14.46 inch optical format (OF )
Diodes Corp. has announced the addition to its line of automotive compliant DC-DC converters. The AP64060Q is a 600mA synchronous step-down converter with input voltages ranging from 4.5V to 40V. It integrates 600mω high-side power MOSFET and 300Mω low-side power MOSFET, providing efficient step-down conversion (up to 90% efficiency) with minimal PCB board space. The AP64060Q is specifically designed for use in automotive powertrains, infotainment systems and instrumentation components, as well as for external lighting in vehicles.
The new gas analyzer DynamIQ-X NG2210 can quickly and accurately monitor natural gas online and provide calorific value for composition control and trade measurement handover. Meanwhile, DynamiQ-X NG2220 can analyze hydrogen-doped natural gas with a concentration of up to 20% using only one carrier gas. Both products can accommodate two to three GC units operating in parallel, each of which can perform a different GC analysis under its own optimized conditions.
Turk CMTH Combined humidity and temperature sensors are now available in a compact version with improved IIoT integration for smart condition monitoring applications. Measuring only 57 mm in length and operating at temperatures ranging from -40 to +100 °C, the IP67 rated M12 housing sensor can be used even in challenging environments. The provided interface also provides easy integration: the standard 64-bit, two-channel IO-Link smart sensor profile (version 4.1.2.) simplifies network system configuration for third parties.
Emerson has introduced TESCOM Anderson Greenwood Instrumentation H2 valve series for hydrogen applications up to 15,000 pounds per square inch (PSI) (103.4 MPa). The new solution can reliably isolate process pressure in high-pressure gas applications such as refueling stations and tube trailers, reducing stray emissions and improving safety.
Aeris has launched the Aeris IoT Readiness Calculator, a free online tool to determine enterprises’ level of preparedness for deploying IoT solutions.
Toshiba Electronic Components and Memory Devices Co., Ltd. announced the introduction of the "TB67S549FTG", a new addition to its stepper motor drive IC product line, which is a stepper motor drive IC in a small package with built-in constant-current control without the need for external circuit components. The new driver IC helps save space on circuit boards and is suitable for industrial equipment such as office automation and financial equipment.
The company has developed a small wireless module "LBEE5KL1YN" with the Wi-Fi™/ Bluetooth ®/ low power Bluetooth two-in-one chip "CYW43439" and a Wi-Fi/ Bluetooth/Bluetooth low power Combo two-in-one product "CYW4373E" with the Wi-Fi/ Bluetooth/Bluetooth low-power Combo chip "CYW43439". Small wireless module "LBEE5PK2AE", both products support audio data communication PCM interface. They are suitable for the miniaturization, high performance, low noise IoT market, handheld wireless systems, gateways, and industrial equipment applications.
The Renesas RZ/N2L MPU is a high-performance ASSP that uses an Arm Cortex-R52 processor with a floating point unit (FPU), NEON™, and 1.5MB on-chip SRAM. This is an industrial Ethernet LSI, which can achieve industrial Ethernet communication. It has parallel host interface and serial host interface to connect the external CPU, which is convenient for the existing system
Rockwell Automation launched Allen-Bradley 42EA RightSight S18 and 42JA VisiSight M20A photoelectric sensor solutions, supporting a variety of induction modes and installation methods, with a number of features, simple operation, cost-effective, It can meet global business operation requirements.
Power Integrations has announced the addition of high-current devices to its LinkSwitch™ -tn2q automotive switch IC product line. The new devices provide up to 850mA of output current without the need for a metal radiator. This highly integrated IC supports a wide input voltage of 30 to 550VDC, enabling electronic devices in ev applications to start and work properly when below the required safe ultra-low voltage (SELV) threshold.
TDK has introduced a new compact EPCOS E13EMHV series SMT transformer with high dielectric strength. Resistance voltage between primary/secondary side up to 3000 V AC (50 Hz, 60 seconds, operating voltage up to 1000 V DC, compact size: 12.9 x 15.8 x 11.4 mm, space distance and creepage distance in accordance with IEC 60664-1 standards and comply with the AEC-Q200 Rev.D standard
The Texas Instruments TPS62851x is a family of pin-to-pin 0.5A, 1A, 2A (continuous), and 3A (peak) high efficiency, easy-to-use, synchronous step-down DC-DC converters.
Schaffner has added to its extensive range of IEC power connectors. The new IL13P-S is a C14/C20 IEC dual locking power connector providing an innovative solution to prevent accidental disconnection in data centres, servers, PDUs, medical devices, industrial equipment, audio/broadcast and other critical power systems.
Vishay Intertechnology, Inc. announced the availability of four new 5th generation FRED Pt® 600 V Ultrafast rectifiers in TO-244 package - VS-VS5HD240CW60, VS-VS5HD300CW60, VS-VS5HD480CW60 and VS-VS5HD600CW60. The rectifier conduction losses are lower than competing FRED Pt Ultrafast solutions in a TO-244 package.
MEMS sensor supplier MIC6100HG has released its first MEMS six-axis inertial sensor (IMU) MIC6100HG, which integrates a 3-axis gyroscope and 3-axis accelerometer to support motion sensing interactive systems such as gamepads and smart remote controls. At the same time, Mexin has a strong algorithm team to provide users with algorithm support, to meet the needs of rich application scenarios.
TDKD's CLT32 series power inductors offer extremely compact dimensions and outstanding electrical values. The nine models have an inductance range of 17 nH to 440 nH and are designed for saturation currents from 13.5 A to 60 A. The compact size of 3.2 mm x 2.5 mm and insertion height of 2.5 mm make these SMT power inductors extremely compact. They are designed for temperatures ranging from -40°C to +165°C (including self-heating)
STMicroelectronics's ST-One is the world's first digital controller with an Arm® Cortex®-M0+ kernel, an offline programmable controller with synchronous rectifier capabilities, and a USB-powered (PD) PHY embedded in a single package. The system is specifically designed to control ZVS non-complementary active clamp flyback converters to create high-power density battery chargers and adapters with USB-PD interfaces.
