Mecyes's advanced Technomet instrument enclosures can be specified in custom colours -- even at low volumes, they are constructed with good tolerances to provide a modern and cohesive design. Die cast front and back bezels for a smooth appearance flush with the casing. Aluminium housings are available in 11 sizes ranging from 225 mm x 200 mm x 75 mm to 350 mm x 320 mm x 150 mm
The primary Bond EP4S-80 is a one-component silver filled epoxy that meets NASA's low vent requirements. Provides unlimited working life at room temperature and requires moderate heat curing at 80 ° C. Viscosity is 10,000-15,000 CPS. Epoxy resins have excellent mechanical properties, with tensile modulus of 500,000-600,000 psi and compressive strength of 22,000-24,000psi at 25 ° C.
Mouser now shares the trigger under the Dash antenna family from Laird antennas, the antennas feature a unique L-shaped format and a dual axis VHB rubber backing that can be quickly and safely installed in difficult locations. Each antenna is equipped with vertical and horizontal V-POL/H-POL cellular radiating elements within the same antenna to provide better coverage while providing significant signal performance improvements, more uniform connectivity and data throughput than traditional antennas
Skyworks has introduced the Si3472 and Si3473 PSE controllers, the latest additions to its 802.3BT PoE family. The new Si3473 offers eight 802.3BT dual-pair Ethernet ports up to 45W each and is backward compatible with the previous generation IEEE 802.3AT and AF standards.
Navitas GaNFast Power integrated circuits integrate GaN power supplies and drives with protection and control, providing simple, compact, fast and efficient performance. The new Dell 60W Quick Charger is an optional "inbox" upgrade to a traditional silicon charger. It measures 66mm x 55mm x 22mm (94cc) and weighs 175G, which is 50% smaller and 25% lighter than earlier silicon chargers.
Parker Hannifin's Chomerics division has introduced its next generation of thermal gap pads, the TherM-A-GAPTM PAD 30 and 60. With reliable thermal performance of 3.2W/ M-K, the cost-effective TherM-A-Gap PAD 30 conforms to rough surface irregularities and air gaps on thermal generating components. The unique formula ensures complete consistency (low clamping force) and minimal exhaust, thus providing an effective thermal interface where uneven surfaces, air gaps or rough textures dominate
Intepro Systems offers a complete suite of testing services for the battery and semiconductor industries, including batteries and battery testers up to 2MW, as well as battery simulators for research and Oems in EV, aerospace and other industries. The company's integrated test system uses the latest regenerative technology to deliver up to 95 percent of the energy output throughout the test process, reducing overall energy costs. Products available include bi-directional DC power supply and 1.9MW automatic ranging source, programmable AC power supply and 2MW regenerative power supply
Amphenol RF has expanded the TNC product range to create a new right Angle cable plug for Times Microwave LMR-240 cables. The new product uses a standard TNC interface and offers a rugged solution that delivers reliable performance up to 6GHz
C&K has released a new optical rotary encoder, the ENC series 24-bit optical encoder, featuring an integrated button. The smooth, precise rotation of the central encoder axis makes it easy for applications such as mode selection or menu navigation to respond quickly and accurately to user input. The new switch provides a smooth feel that allows for fast rotation. It is suitable for mode selection of control panels and other similar functions in industrial environments.
Amphenol FCI Basics ComboLock wire-to-board connector's compact design delivers the power and signal requirements of limited space applications. The connector system features a hybrid 1mm pitch signal and 3mm pitch power configuration with power cord sizes from 26AWG to 18AWG and signal line sizes from 30AWG to 24AWG
NXP Semiconductor has launched the S32G3 series, expanding the S32G family of automotive network processors with four initial devices. These new devices offer 2.5 times more application processing performance. The series offers 2.5 times more application processing, two ports of Ethernet bandwidth and on-chip system memory than the current series of devices with the highest performance.
SEGGER has released a J-Link package specifically for the Windows on Arm platform. The new package runs software on Arm processors, ensuring no performance or power loss during simulation. And contains the same components as the J-Link software suite, providing the same functionality as other operating systems
Renesas Electronics offers two new MCUS for automotive actuator and sensor control applications, enabling edge evolution of next-generation electronic and electrical architectures (E/E). The new generation of MCUS operates about 70 percent faster than the previous generation, doubling performance in brushless DC applications. Renesas has also enhanced the motor controlled hardware accelerator and timer functionality and added a 12-bit A /D converter to give customers the improved functionality and performance level they require.
The XENSIV PAS CO2 sensor uses photoacoustic spectroscopy, which significantly reduces form factor and is also less expensive. The combination of small size (13.8mm x 14mm x 7.5mm) and SMD technology makes integration into batch applications easier. With advanced compensation and self-calibration algorithms, the sensor provides persistent and consistent high measurement quality
Sensirion has introduced the SGP41 VOC+NOx sensor for indoor air quality. The sensor provides a solution of two complete sensors on a single chip for easy design and reduced design costs. Digital intelligent switches and adjustment units used in air treatment equipment such as air purifiers.
Advantech has released the TPC-B610 series, which is an industrial touch panel PC system with 10 generation Intel processor slots, fanless design, 6 USB ports, and offers multiple extensions via one PCIe X16, one PCIe X4, and two M.2 (NVMe, SATA, 5G), To meet the final data and image processing needs. The device's two PCIe slots will help industries such as food and beverage, the device supports Windows Microsoft 10 LTSC and Advantech Linux embedded operating systems, and the series is considered to be the first industrial touchscreen PC
Microchip Technology AtMXT640UD-dev-PCB Control Board (EV30P71A), iS a development platform for ATMXT640UD maXTouch touch controller. The board features a pre-installed ATMXT640UD maXTouch touch screen controller in a 6mm × 6mm UFBGA-88 package that allows connections to PCS running maXTouch Studio LITE software
Selig has introduced the X2E Automotive Ethernet Converter, designed to convert Ethernet signals from the automotive ECU for suitable connection to a PC or data logger. The converter also provides high-speed CAN transceiver functionality. Rugged 4.1 "x 2.2" x 0.83 "aluminum housing, supplied from 6V to 28V, has a maximum current consumption of 150mA at 12V and a maximum standby current of 1mA.
