TE Connectivity AMP Connectors Productos

CRGS1206J180K

TE Connectivity AMP Connectors

RES SMD 180K OHM 5% 0.6W 1206

• Resistance: 180 kOhms
• Tolerance: ±5%
• Power (Watts): 0.6W
• Composition: Thick Film
• Features: Pulse Withstanding
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature: -55°C ~ 155°C
• Package / Case: 1206 (3216 Metric)
• Supplier Device Package: 1206
• Size / Dimension: 0.122" L x 0.061" W (3.10mm x 1.55mm)
• Height - Seated (Max): 0.026" (0.65mm)
• Number of Terminations: 2
• Failure Rate: -

Paquete: 1206 (3216 Metric)

9-51864-1

TE Connectivity AMP Connectors

CONN RING CIRC 14AWG #10 CRIMP

• Terminal Type: Circular
• Stud/Tab Size: 10 Stud
• Thickness: 0.031" (0.79mm)
• Width - Outer Edges: 0.312" (7.92mm)
• Length - Overall: 0.906" (23.01mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 14 AWG
• Insulation: Insulated
• Features: Insulation Restriction
• Color: Blue, Green Stripe
• Contact Material: Copper
• Contact Finish: Tin

Paquete: -

160467-2

TE Connectivity AMP Connectors

CONN RING CIRC 13.5-17AWG M10

• Terminal Type: Circular
• Stud/Tab Size: M10 Stud
• Thickness: 0.031" (0.79mm)
• Width - Outer Edges: 0.650" (16.50mm)
• Length - Overall: 1.173" (29.80mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 13.5-17 AWG
• Insulation: Non-Insulated
• Features: -
• Color: -
• Contact Material: Brass
• Contact Finish: Tin

Paquete: -

2-147436-0

TE Connectivity AMP Connectors

CONN PC PIN SQUARE 0.045 TIN

• Terminal Type: Single Post
• Terminal Style: Pin Retention
• Pin Size - Above Flange: 0.045" (1.14mm) Square
• Pin Size - Below Flange: 0.045" (1.14mm) Square
• Length - Above Flange: -
• Length - Below Flange: -
• Length - Overall: 0.590" (14.99mm)
• Flange Diameter: -
• Mounting Hole Diameter: 0.070" ~ 0.077" (1.78mm ~ 1.96mm)
• Mounting Type: Through Hole
• Termination: Press-Fit
• Insulation: Non-Insulated
• Board Thickness: 0.100" (2.54mm)
• Contact Material: Brass
• Contact Finish: Tin
• Contact Finish Thickness: 100µin (2.54µm)

Paquete: -

62304-2

TE Connectivity AMP Connectors

CONN MAG TERM 600-3000CMA CRIMP

• Style: Pigtail
• Terminal Type: Splice
• Size: -
• Termination: Crimp
• Wire Gauge: 600-3000 CMA
• Features: Serrated Mating Area

Paquete: -

1776261-5

TE Connectivity AMP Connectors

TERMINAL BLK 5POS 5MM SIDE ENT

• Number of Levels: 1
• Positions Per Level: 5
• Pitch: 0.197" (5.00mm)
• Mating Orientation: Horizontal with Board
• Current: 10A
• Voltage: 300V
• Wire Gauge: 14-22 AWG
• Mounting Type: Through Hole
• Wire Termination: Screwless - Leg Spring, Push-In Spring
• Features: -
• Color: Green

Paquete: -

1-1546973-3

TE Connectivity AMP Connectors

CONN BARRIER STRP 13CIRC 0.438"

• Terminal Block Type: Barrier Block
• Number of Circuits: 13
• Number of Circuits: 13
• Number of Wire Entries: 13
• Pitch: 0.438" (11.12mm)
• Number of Rows: 1
• Current Rating: 20A
• Voltage Rating: 600V
• Wire Gauge: 12-22 AWG
• Top Termination: Screws with Captive Plate
• Bottom Termination: Solder Turret
• Barrier Type: 2 Wall (Dual)
• Features: -
• Color: Black

Paquete: -

PCB1A12A

TE Connectivity AMP Connectors

TERM BLOCK CARDEDGE 12POS GOLD

• Convert From (Adapter End): Terminal Blocks, Screw Connection, 12 Pos, 1 Row
• Convert To (Adapter End): Card Edge Connector, 12 Pos
• Mounting Type: Board Mounted
• Wire Gauge: 12 AWG

Paquete: -

643424-2

TE Connectivity AMP Connectors

CONN HEADER 6POS VERT .250 AU

• Connector Type: Header
• Contact Type: Female Socket
• Style: Board to Cable/Wire
• Number of Positions: 6
• Number of Positions Loaded: All
• Pitch - Mating: 0.250" (6.35mm)
• Number of Rows: 3
• Row Spacing - Mating: 0.250" (6.35mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Locking Ramp
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 30µin (0.76µm)
• Insulation Color: Natural
• Insulation Height: 0.580" (14.73mm)
• Contact Length - Post: 0.155" (3.94mm)
• Operating Temperature: -40°C ~ 105°C
• Material Flammability Rating: UL94 V-0
• Contact Finish - Post: Tin-Lead
• Mated Stacking Heights: -
• Ingress Protection: -
• Features: Board Guide

Paquete: -

1-826631-4

TE Connectivity AMP Connectors

CONN HEADER BRKWY 14POS R/A GOLD

• Connector Type: Header, Breakaway
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Board or Cable
• Shrouding: Unshrouded
• Number of Positions: 14
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Length - Mating: 0.264" (6.70mm)
• Contact Length - Post: 0.126" (3.20mm)
• Overall Contact Length: -
• Insulation Height: 0.120" (3.05mm)
• Contact Shape: Square
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 3.9µin (0.10µm)
• Contact Finish - Post: Tin
• Contact Material: Brass
• Insulation Material: Polybutylene Terephthalate (PBT)
• Features: -
• Operating Temperature: -65°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Green

Paquete: -

1445101-2

TE Connectivity AMP Connectors

CONN HEADER 2POS R/A 30GOLD SMD

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.118" (3.00mm)
• Style: Board to Cable/Wire
• Shrouding: Shrouded - 4 Wall
• Number of Positions: 2
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Surface Mount, Right Angle
• Termination: Solder
• Fastening Type: Locking Ramp
• Contact Length - Mating: -
• Contact Length - Post: -
• Overall Contact Length: -
• Insulation Height: 0.152" (3.85mm)
• Contact Shape: Square
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 30µin (0.76µm)
• Contact Finish - Post: Tin-Lead
• Contact Material: Brass
• Insulation Material: Polyamide (PA), Nylon
• Features: Board Lock
• Operating Temperature: -40°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black

Paquete: -

5-146277-4

TE Connectivity AMP Connectors

04 MODII HDR SRST B/A .100CL

• Connector Type: Header, Breakaway
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Board or Cable
• Shrouding: Unshrouded
• Number of Positions: 4
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Length - Mating: 0.318" (8.08mm)
• Contact Length - Post: 0.125" (3.18mm)
• Overall Contact Length: 0.533" (13.55mm)
• Insulation Height: 0.090" (2.29mm)
• Contact Shape: Square
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 30µin (0.76µm)
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Liquid Crystal Polymer (LCP)
• Features: -
• Operating Temperature: -65°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black

Paquete: -

2-640432-0

TE Connectivity AMP Connectors

CONN RCPT 20POS 20AWG MTA-156

• Connector Type: Receptacle
• Contact Type: Female Socket
• Number of Positions: 20
• Pitch: 0.156" (3.96mm)
• Number of Rows: 1
• Row Spacing: -
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: -
• Cable Termination: IDC
• Wire Type: Discrete or Ribbon Cable
• Wire Gauge: 20 AWG
• Features: Closed End
• Contact Finish: Tin-Lead
• Contact Finish Thickness: 80µin (2.03µm)
• Color: Yellow

Paquete: -

1658623-9

TE Connectivity AMP Connectors

CONN IDC SOCKET 40POS GOLD

• Connector Type: Receptacle
• Contact Type: Female Socket
• Number of Positions: 40
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: -
• Cable Termination: IDC
• Wire Type: Ribbon Cable
• Wire Gauge: 26-28 AWG
• Features: Feed Through
• Contact Finish: Gold or Gold-Palladium
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black

Paquete: -

146475-3

TE Connectivity AMP Connectors

03 MODII HDR SRST UNSHRD STKG

• Number of Positions: 3
• Pitch: 0.100" (2.54mm)
• Number of Rows: 1
• Row Spacing: -
• Length - Overall: 1.230" (31.24mm)
• Length - Post (Mating): 0.330" (8.38mm)
• Length - Stack Height: 0.800" (20.32mm)
• Length - Tail: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Post (Mating): Gold
• Contact Finish Thickness - Post (Mating): 15µin (0.38µm)
• Color: Black

Paquete: -

5767115-5

TE Connectivity AMP Connectors

CONN RCPT 190POS .025 VERT SMD

• Connector Type: Receptacle, Center Strip Contacts
• Number of Positions: 190
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Features: Board Guide, Ground Bus (Plane)
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Mated Stacking Heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm
• Height Above Board: 0.236" (6.00mm)

Paquete: -

1903302-1

TE Connectivity AMP Connectors

CONN SD CARD PUSH-PUSH R/A SMD

• Card Type: Secure Digital - SD
• Number of Positions: -
• Connector Type: Connector and Ejector
• Insertion, Removal Method: Push In, Push Out
• Ejector Side: -
• Mounting Type: Surface Mount, Right Angle
• Features: Board Guide
• Height Above Board: -
• Mounting Feature: Reverse - Bottom
• Contact Finish: Gold
• Contact Finish Thickness: -

Paquete: -

1473005-4

TE Connectivity AMP Connectors

CONN SKT SODIMM 200POS R/A SMD

• Connector Style: SODIMM
• Number of Positions: 200
• Memory Type: DDR2 SDRAM
• Standards: -
• Mounting Type: Surface Mount, Right Angle
• Features: Board Guide, Latches
• Mounting Feature: Normal, Standard - Top
• Contact Finish: Gold
• Contact Finish Thickness: Flash

Paquete: -

1106472-2

TE Connectivity AMP Connectors

CONN BASE SIDE ENTRY SZ8 M40

• Connector Type: Base - Box Mount
• Style: Side Entry
• Size: 8
• Lock Location: Screw Locks on Hood
• Thread Size: M40
• Size / Dimension: 5.906" L x 2.205" W x 3.150" H (150.00mm x 45.00mm x 80.00mm)
• Housing Color: Black
• Features: Feed Through
• Ingress Protection: IP68/69K - Dust Tight, Water Resistant, Waterproof
• Housing Material: Aluminum Alloy, Die Cast
• Housing Finish: Chromite TCP Passivation
• Operating Temperature: -

Paquete: -

747578-1

TE Connectivity AMP Connectors

CONN D-SUB RECEPT 50POS W/O CONT

• Connector Style: D-Sub
• Connector Type: Receptacle for Female Contacts
• Number of Positions: 50
• Number of Rows: 3
• Shell Size, Connector Layout: 5 (DD, D)
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: Shielded
• Shell Material, Finish: Steel, Tin Plated
• Shell Finish Thickness: -
• Ingress Protection: -

Paquete: -

1658650-1

TE Connectivity AMP Connectors

CONN D-SUB PLUG 37POS W/O CONT

• Connector Style: D-Sub
• Connector Type: Plug for Male Contacts
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: Grounding Indents, Shielded
• Shell Material, Finish: Steel, Tin Plated
• Shell Finish Thickness: 200µin (5.08µm)
• Ingress Protection: -

Paquete: -

5787170-9

TE Connectivity AMP Connectors

CONN D-TYPE RCPT 100POS R/A SLDR

• Connector Style: D-Type
• Connector Type: Receptacle, Female Sockets
• Number of Positions: 100
• Number of Rows: 2
• Shell Size, Connector Layout: 0.050 Pitch x 0.100 Row to Row
• Contact Type: Signal
• Mounting Type: Board Edge, Through Hole, Right Angle
• Flange Feature: Housing/Shell (4-40)
• Termination: Solder
• Features: Board Lock, Shielded
• Shell Material, Finish: Steel, Nickel Plated
• Contact Finish: Gold
• Contact Finish Thickness: -
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0

Paquete: -

8-227079-9

TE Connectivity AMP Connectors

CONN BNC PLUG STR 50 OHM CRIMP

• Connector Style: BNC
• Connector Type: Plug, Male Pin
• Contact Termination: Crimp
• Shield Termination: Crimp
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Mounting Feature: -
• Cable Group: RG-141A, Belden 9907
• Fastening Type: Bayonet Lock
• Frequency - Max: 4GHz
• Features: -
• Housing Color: Silver
• Ingress Protection: -

Paquete: -

3-2172069-2

TE Connectivity AMP Connectors

CONN MALE M8 4POS STRT PCB

• Connector Type: Plug, Male Pins
• Number of Positions: 4
• Shell Size - Insert: M8-4
• Shell Size, MIL: -
• Mounting Type: Panel Mount, Bulkhead - Front Side Nut; Through Hole
• Termination: Solder
• Fastening Type: Threaded
• Orientation: -
• Ingress Protection: IP67 - Dust Tight, Waterproof
• Shell Material, Finish: Brass
• Contact Finish: Gold
• Features: -
• Voltage - Rated: 30V
• Current Rating: 4A

Paquete: -

211769-4

TE Connectivity AMP Connectors

CONN RCPT HSNG FMALE 9POS PNL MT

• Connector Type: Receptacle Housing
• Type: For Female Sockets
• Number of Positions: 9
• Shell Size - Insert: 17-9
• Shell Size, MIL: -
• Contact Type: Crimp
• Contact Size: 16
• Mounting Type: Panel Mount
• Mounting Feature: Flange
• Fastening Type: Threaded
• Orientation: A
• Shell Material: Thermoplastic
• Shell Finish: -
• Housing Color: Black
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Features: -
• Shielding: Unshielded

Paquete: -

5145165-2

TE Connectivity AMP Connectors

CONN PCI CARDEDGE FEMALE 184POS

• Card Type: PCI 3.3V 64 Bit
• Gender: Female
• Number of Positions/Bay/Row: 11; 49; 32
• Number of Positions: 184
• Card Thickness: 0.062" (1.57mm)
• Number of Rows: 2
• Pitch: 0.050" (1.27mm)
• Features: Board Guide
• Mounting Type: Through Hole
• Termination: Solder, Staggered
• Contact Material: Phosphor Bronze
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Contact Type: -
• Color: Natural
• Flange Feature: -
• Operating Temperature: -

Paquete: -

1-521799-9

TE Connectivity AMP Connectors

TST P REC 130LO BI WHT TPBR

• Type: Tip Jack
• Gender: Female
• Plug/Mating Plug Diameter: Standard Tip
• Mounting Type: Through Hole, Horizontal
• Termination: Solder
• Insulation: Mating End Insulated
• Features: For 0.080 Dia Test Plug
• Color: White
• Wire Gauge: -

Paquete: -

2110106-1

TE Connectivity AMP Connectors

IMP R5 10 UNG0.39SN NONE

• Connector Usage: Daughtercard
• Connector Type: Receptacle, Female Sockets
• Connector Style: Impact?
• Number of Positions: 150
• Number of Positions Loaded: All
• Pitch: 0.053" (1.35mm)
• Number of Rows: 15
• Number of Columns: 10
• Mounting Type: Board Edge, Through Hole, Right Angle
• Termination: Press-Fit
• Contact Layout, Typical: -
• Features: -
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black

Paquete: -