TE Connectivity AMP Connectors Productos

CRGS2010J12R

TE Connectivity AMP Connectors

RES SMD 12 OHM 5% 3/4W 2010

• Resistance: 12 Ohms
• Tolerance: ±5%
• Power (Watts): 0.75W, 3/4W
• Composition: Thick Film
• Features: Pulse Withstanding
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature: -55°C ~ 155°C
• Package / Case: 2010 (5025 Metric)
• Supplier Device Package: 2010
• Size / Dimension: 0.197" L x 0.098" W (5.00mm x 2.50mm)
• Height - Seated (Max): 0.026" (0.65mm)
• Number of Terminations: 2
• Failure Rate: -

Paquete: 2010 (5025 Metric)

2-32050-1

TE Connectivity AMP Connectors

CONN SPADE TERM 16-22AWG #8 RED

• Terminal Type: Standard
• Stud/Tab Size: 8 Stud
• Width - Outer Edges: 0.375" (9.53mm)
• Length - Overall: 0.908" (23.06mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 16-22 AWG
• Insulation: Insulated
• Features: Serrated Termination
• Color: Red

Paquete: -

322258

TE Connectivity AMP Connectors

CONN RING CIRC 300-350MCM #7/16

• Terminal Type: Circular
• Stud/Tab Size: 7/16 Stud
• Thickness: 0.136" (3.45mm)
• Width - Outer Edges: 1.545" (39.24mm)
• Length - Overall: 2.671" (67.84mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 300-350 MCM (kcmil)
• Insulation: Non-Insulated
• Features: Brazed Seam, Serrated Termination
• Color: -
• Contact Material: Copper
• Contact Finish: Tin

Paquete: -

3-147071-6

TE Connectivity AMP Connectors

CONN PC PIN SQUARE 0.045 GOLD

• Terminal Type: Single Post
• Terminal Style: Smooth
• Pin Size - Above Flange: 0.045" (1.14mm) Square
• Pin Size - Below Flange: 0.045" (1.14mm) Square
• Length - Above Flange: -
• Length - Below Flange: -
• Length - Overall: 0.750" (19.05mm)
• Flange Diameter: -
• Mounting Hole Diameter: 0.056" ~ 0.062" (1.42mm ~ 1.57mm)
• Mounting Type: Through Hole
• Termination: Press-Fit
• Insulation: Non-Insulated
• Board Thickness: 0.100" (2.54mm)
• Contact Material: Brass
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)

Paquete: -

0223

TE Connectivity AMP Connectors

TERM BLK NEMA 2POS 22.1MM

• Type: NEMA Open Construction
• Mounting Type: Channel, DIN Rail Mount
• Number of Positions: 2
• Number of Levels: 1
• Terminal - Width: 22.1mm
• Termination Style: Tubular Clamp
• Current - IEC: -
• Voltage - IEC: -
• Current - UL: 65A
• Voltage - UL: 600V
• Wire Gauge or Range - AWG: 6-18 AWG
• Wire Gauge or Range - mm²: -
• Features: -
• Housing Color: -

Paquete: -

1546721-3

TE Connectivity AMP Connectors

CONN BARRIER STRIP 3CIRC 0.375"

• Terminal Block Type: Barrier Block
• Number of Circuits: 3
• Number of Circuits: 3
• Number of Wire Entries: 3
• Pitch: 0.375" (9.53mm)
• Number of Rows: 1
• Current Rating: 20A
• Voltage Rating: 300V
• Wire Gauge: 12-22 AWG
• Top Termination: Screws with Captive Plate
• Bottom Termination: PC Pin
• Barrier Type: 2 Wall (Dual)
• Features: -
• Color: Black

Paquete: -

1-1355591-1

TE Connectivity AMP Connectors

MODU II PIN HEADER ASSY 42 POS

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Board or Cable
• Shrouding: Shrouded - 4 Wall
• Number of Positions: 42
• Number of Positions Loaded: All
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Lever Lock
• Contact Length - Mating: -
• Contact Length - Post: 0.110" (2.79mm)
• Overall Contact Length: -
• Insulation Height: 0.744" (18.90mm)
• Contact Shape: Square
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Polyamide (PA6), Nylon 6
• Features: Board Lock
• Operating Temperature: -
• Ingress Protection: -
• Material Flammability Rating: -
• Insulation Color: Black

Paquete: -

9-103323-0-09

TE Connectivity AMP Connectors

CONN HEADR BRKWAY .100 09POS R/A

• Connector Type: Header, Breakaway
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Board or Cable
• Shrouding: Unshrouded
• Number of Positions: 9
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Length - Mating: 0.318" (8.08mm)
• Contact Length - Post: 0.110" (2.79mm)
• Overall Contact Length: -
• Insulation Height: 0.138" (3.50mm)
• Contact Shape: Square
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: 100µin (2.54µm)
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Thermoplastic
• Features: -
• Operating Temperature: -65°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black

Paquete: -

643888-3

TE Connectivity AMP Connectors

17P MTA156 HDR ASM SQ RA -4&5

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.156" (3.96mm)
• Style: Board to Cable/Wire
• Shrouding: Unshrouded
• Number of Positions: 17
• Number of Positions Loaded: 15
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: -
• Contact Length - Mating: 0.390" (9.91mm)
• Contact Length - Post: 0.125" (3.18mm)
• Overall Contact Length: -
• Insulation Height: 0.125" (3.18mm)
• Contact Shape: Square
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Thermoplastic, Glass Filled
• Features: -
• Operating Temperature: -55°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Natural

Paquete: -

5-1571138-1

TE Connectivity AMP Connectors

02 MTE HDR SRRA LATCH W/HD TIN

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Board or Cable
• Shrouding: Shrouded - 4 Wall
• Number of Positions: 2
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Latch Holder
• Contact Length - Mating: 0.230" (5.84mm)
• Contact Length - Post: -
• Overall Contact Length: -
• Insulation Height: -
• Contact Shape: -
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: 100µin (2.54µm)
• Contact Finish - Post: Tin
• Contact Material: -
• Insulation Material: -
• Features: Board Guide
• Operating Temperature: -
• Ingress Protection: -
• Material Flammability Rating: -
• Insulation Color: -

Paquete: -

5102156-5

TE Connectivity AMP Connectors

CONN HEADER VERT 24POS .100 GOLD

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Cable/Wire
• Shrouding: Shrouded - 4 Wall
• Number of Positions: 24
• Number of Positions Loaded: All
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Length - Mating: 0.240" (6.10mm)
• Contact Length - Post: 0.155" (3.94mm)
• Overall Contact Length: 0.684" (17.37mm)
• Insulation Height: 0.549" (13.94mm)
• Contact Shape: Square
• Contact Finish - Mating: Gold or Gold-Palladium
• Contact Finish Thickness - Mating: 30µin (0.76µm)
• Contact Finish - Post: Tin
• Contact Material: -
• Insulation Material: -
• Features: Keying Slot, Mounting Flange
• Operating Temperature: -65°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black

Paquete: -

1761608-6

TE Connectivity AMP Connectors

CONN HEADER LOPRO STR .100 16POS

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Cable/Wire
• Shrouding: Shrouded - 4 Wall
• Number of Positions: 16
• Number of Positions Loaded: All
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks, Short
• Contact Length - Mating: 0.237" (6.02mm)
• Contact Length - Post: 0.102" (2.60mm)
• Overall Contact Length: -
• Insulation Height: 0.404" (10.26mm)
• Contact Shape: Square
• Contact Finish - Mating: Gold or Gold-Palladium
• Contact Finish Thickness - Mating: 30µin (0.76µm)
• Contact Finish - Post: Tin
• Contact Material: Phosphor Bronze
• Insulation Material: Polybutylene Terephthalate (PBT)
• Features: Keying Slot
• Operating Temperature: -65°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black

Paquete: -

647478-3

TE Connectivity AMP Connectors

03P MTA156 CONN ASSY 22AWG RED

• Connector Type: -
• Contact Type: -
• Number of Positions: -
• Pitch: -
• Number of Rows: -
• Row Spacing: -
• Mounting Type: -
• Fastening Type: -
• Cable Termination: -
• Wire Type: -
• Wire Gauge: -
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Color: -

Paquete: -

640620-3

TE Connectivity AMP Connectors

CONN RECEPT 3POS 22AWG MTA100

• Connector Type: Receptacle
• Contact Type: Female Socket
• Number of Positions: 3
• Pitch: 0.100" (2.54mm)
• Number of Rows: 1
• Row Spacing: -
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Locking Ramp
• Cable Termination: IDC
• Wire Type: Discrete or Ribbon Cable
• Wire Gauge: 22 AWG
• Features: Feed Through
• Contact Finish: Tin-Lead
• Contact Finish Thickness: 80µin (2.03µm)
• Color: Red

Paquete: -

3-640430-4

TE Connectivity AMP Connectors

CONN RECEPT 4POS 26AWG MTA156

• Connector Type: Receptacle
• Contact Type: Female Socket
• Number of Positions: 4
• Pitch: 0.156" (3.96mm)
• Number of Rows: 1
• Row Spacing: -
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Locking Ramp
• Cable Termination: IDC
• Wire Type: Discrete or Ribbon Cable
• Wire Gauge: 26 AWG
• Features: Closed End
• Contact Finish: Tin
• Contact Finish Thickness: 80µin (2.03µm)
• Color: Blue

Paquete: -

2-146509-3

TE Connectivity AMP Connectors

46 MODII HDR DRST UNSHRD STKG

• Number of Positions: 46
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Length - Overall: 1.430" (36.32mm)
• Length - Post (Mating): 0.330" (8.38mm)
• Length - Stack Height: 1.000" (25.40mm)
• Length - Tail: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Post (Mating): Gold
• Contact Finish Thickness - Post (Mating): 15µin (0.38µm)
• Color: Black

Paquete: -

2-146503-8

TE Connectivity AMP Connectors

56 MODII HDR DRST UNSHRD STKG

• Number of Positions: 56
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Length - Overall: 1.230" (31.24mm)
• Length - Post (Mating): 0.330" (8.38mm)
• Length - Stack Height: 0.800" (20.32mm)
• Length - Tail: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Post (Mating): Gold
• Contact Finish Thickness - Post (Mating): 15µin (0.38µm)
• Color: Black

Paquete: -

5-1735480-5

TE Connectivity AMP Connectors

CONN RCPT 120POS .8MMFH 17H GOLD

• Connector Type: Receptacle, Outer Shroud Contacts
• Number of Positions: 120
• Pitch: 0.031" (0.80mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Features: Board Guide
• Contact Finish: Gold
• Contact Finish Thickness: 8µin (0.20µm)
• Mated Stacking Heights: 17mm
• Height Above Board: 0.620" (15.75mm)

Paquete: -

207253-6

TE Connectivity AMP Connectors

AMPLIMITE,ASY,RCPT,109,1,NM,W/CO

• Connector Style: -
• Connector Type: -
• Number of Positions: -
• Number of Rows: -
• Shell Size, Connector Layout: -
• Contact Type: -
• Mounting Type: -
• Flange Feature: -
• Features: -
• Shell Material, Finish: -
• Shell Finish Thickness: -
• Ingress Protection: -

Paquete: -

1757833-1

TE Connectivity AMP Connectors

CONN D-SUB PLUG 9POS STR SOLDER

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 9
• Number of Rows: 2
• Shell Size, Connector Layout: 1 (DE, E)
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Termination: Solder
• Features: -
• Shell Material, Finish: Steel, Yellow Chromate Plated Zinc
• Contact Finish: Gold
• Contact Finish Thickness: -
• Ingress Protection: -
• Material Flammability Rating: -

Paquete: -

84505-1

TE Connectivity AMP Connectors

CONN PLUG 80POS .050 STRDL MNT

• Connector Style: Center Strip Contacts
• Connector Type: Plug
• Number of Positions: 80
• Number of Rows: 2
• Mounting Type: Board Edge, Straddle Mount
• Termination: Solder
• Flange Feature: -
• Type: SCA-2
• Features: -
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)

Paquete: -

1052902-1

TE Connectivity AMP Connectors

CONN SMA RCPT STR 50 OHM SOLDER

• Connector Style: SMA
• Connector Type: Receptacle, Female Socket
• Contact Termination: Solder, Microstrip
• Shield Termination: Solder
• Impedance: 50 Ohm
• Mounting Type: Panel Mount
• Mounting Feature: Flange
• Cable Group: -
• Fastening Type: Threaded
• Frequency - Max: 18GHz
• Features: Extended Insulation
• Housing Color: Silver
• Ingress Protection: -

Paquete: -

5-1478996-1

TE Connectivity AMP Connectors

CONN STRN RELIEF FOR BNC TNC UHF

• Connector Style: -
• Accessory Type: Strain Relief
• For Use With/Related Products: BNC, N Type, TNC, UHF Connectors
• Body Material: Polyvinyl Chloride (PVC)
• Body Finish: -
• Features: Color Coded
• Color: White

Paquete: -

2058588-3

TE Connectivity AMP Connectors

CONN PLUG MALE 14POS SLDR WHITE

• Connector Type: Plug, Male Pins
• Number of Positions: 14
• Shell Size - Insert: -
• Shell Size, MIL: -
• Mounting Type: Free Hanging (In-Line)
• Termination: Solder
• Fastening Type: Detent Lock
• Orientation: 40°
• Ingress Protection: -
• Shell Material, Finish: Thermoplastic
• Contact Finish: Gold
• Features: Disposable
• Voltage - Rated: -
• Current Rating: -

Paquete: -

T4171210505-001

TE Connectivity AMP Connectors

M12,FRONT MOUNTING,MALE,D,5P,0.2

• Connector Type: -
• Number of Positions: -
• Shell Size - Insert: -
• Shell Size, MIL: -
• Mounting Type: -
• Termination: -
• Fastening Type: -
• Orientation: -
• Ingress Protection: -
• Shell Material, Finish: -
• Contact Finish: -
• Features: -
• Voltage - Rated: -
• Current Rating: -

Paquete: -

TXR40SJ90-1005AI

TE Connectivity AMP Connectors

CONN BACKSHELL ADPT SZ 11B M15

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.827" (21.00mm)
• Shell Size - Insert: 11, B
• Thread Size: M15x1
• Cable Exit: 90°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Shielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

Paquete: -

1-5223083-2

TE Connectivity AMP Connectors

CONN HEADER 120POS 2MM PRESSFIT

• Connector Usage: -
• Connector Type: Header, Male Pins
• Connector Style: Futurebus
• Number of Positions: 120
• Number of Positions Loaded: All
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Number of Columns: -
• Mounting Type: Through Hole
• Termination: Press-Fit
• Contact Layout, Typical: -
• Features: -
• Contact Finish: Gold
• Contact Finish Thickness: -
• Color: Natural

Paquete: -

352625-1

TE Connectivity AMP Connectors

CONN HEADER 159POS TYPE B VERT

• Connector Type: Header, Male Pins
• Connector Style: B 25
• Number of Positions: 175 (125 + 50 Ground)
• Number of Positions Loaded: 159
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5 + 2
• Mounting Type: Through Hole
• Termination: Press-Fit
• Connector Usage: Backplane
• Contact Finish: Gold
• Contact Finish Thickness: -

Paquete: -